Installing a PTAC system in your property is always a great way to have an efficient and highly reliable climate control system.
The great thing about these systems is that they don’t require any ductwork and this can save you a lot of time and money in installation.
Despite this, you still need to be extra careful when you’re setting up these units.
Well, here are some important tips to keep in mind:
- Pick a Location
The location where the PTAC system will be installed determines a lot of things. For instance, several climate control models are designed to cater to a specific amount of space.
This would then follow that if you have a bigger residence, you’d probably need a more powerful and advanced PTAC system than someone who has a smaller home.
Additionally, it’s also important to pick just the right place on the wall that makes it easier for you to operate the appliance once it’s fully installed.
There should be at least 6-8 inches of space between the unit and the walls too. This helps to maintain proper air circulation around the appliance.
- Secure the PTAC
It’s also advisable to go for an anchored, stable installation when dealing with PTAC systems.
This won’t only help improve the performance of the system but it will extend its life substantially. For instance, you can start off by framing the PTAC unit with secure wood studs on the wall.
Don’t forget to install a lintel over the unit. This simply ensures that the weight of the wall isn’t putting too much stress on the system. Take a lot of care too when you’re screwing the PTAC system into the wall.
If you’re too aggressive, you risk puncturing the base pan, which is designed to collect condensation. Even a small puncture on the base pan can lead to unwanted leaks that cost more money to fix. You can talk to PTAC4Less and get a few tips on how to go about this.
Finally, you may also want to insulate the perimeter around the unit once it’s fully installed. PTAC units are already highly efficient. But adding an extra layer of insulation will save you a whole lot more on energy costs.
- Inspect the Outlets
Make sure you also verify that all outlets and wring that will power the PTAC unit are good enough to handle the power requirements of the system.
Installing a high voltage PTAC unit on a low voltage outlet can increase the risk of fire in your home. It can also damage the PTAC unit.
- Weatherproof the Unit
Part of the PTAC system will stick outside when the installation is completed.
For this reason, it’s always very important to make sure these exterior parts are weatherproof. Conditions outside aren’t the same as inside.
When your unit is exposed to the elements, the risk of damage goes up massively. Weatherproofing helps to reduce that risk, and in the process, extend the life of your unit.